In recent years, the concert truss stage has been widely used in various stage venues, performances, exhibitions, etc., but the materials are still more and need more time to build. Wedding Drape Manufacturer teaches you to quickly build an aluminum stage.

Aluminum alloy stage construction method:

1. Position the base at an approximate position on the ground;

2. Insert the bottom of the tilting support into the outside of each base;

3. Fixing the counter head on the base with screws;

4. Set a square cover on the square head;

5. Screw the beam;

6. The two ends of the beam are respectively connected with two square sleeves on both sides, and the beam portion is assembled on the ground;

7. Attach the aluminum stage truss to the plane, then screw one end onto the counter head and the other end onto the cross arm. At the same time, connect the crane to the crossbar. The function of the hoist is to raise the lower truss; (you can also install the hoist after the column is set.)

8. Some people together slowly lift the column truss, be careful not to push the column too much, then fix the screw above the head;

9. After the column is erected, the hook below the hanging crane is hooked to the lower beam by the sling;

10. 4 people slowly shake the hoist to pull the beam to the left and right sides of the person;

11. Installing lighting and sound equipment on the beam;

12. 4 people sway the hoist together to a predetermined height to stop;

13. Tighten the diagonal support and one end of the post and tighten the other end with the horizontal support of the base to complete the gantry.

https://www.tytruss.com/Square-Truss/Square-Spigot-Truss.shtml